Here are my D&T work.

This is my Tea Light Holder.
Made from acrylic.
For the stand on the bottom are made of layered of Plywood and MDF.

First I cut the MDF and the Plywood by 50mm by 60mm. Then I cut it into the shape that I’ve planned for and stick it together by using PVA glue. When it is dried, I then varnish it.

For the Acrylic, I heat it up in the oven with a slow heat for 15mins. Then I slowly push the acrylic into a bowl so that the shape at the corner of the acrylic is bend.

Finally, to stick the stand and the acrylic, I screw it up together in the middle.